Structural steel, Grills, Machinery and equipment, piping. Can be used as a shopcoat primer. For interior/exterior use.
|Colour Range :||Red Oxide ( Self Standard )|
|Finish :||Smooth & Flat|
|Sp. Gravity. Kg./Ltr. :||1.20 ÃÂ± 0.03|
|Theoretical covering:||Approx. 240~ 260 Sq.Ft/ Lit/ coat. Practical coverage may vary depending on surface profile, method of application and losses and substrate type|
|Recommended Dry Film Thickness per coat :||15-20 Microns|
(at 25 + 2ÃÂ° C &RH 60 + 5%) :
Cooler temperatures, higher film thickness or higher humidity conditions will require longer drying time
|Toxicity:||Dry Film is non-toxic and lead free|
|Flash Point :||Not applicable|
|Volume solids:||36 ÃÂ± 2 %|
|Packs available:||20 L,10L, 4 L, 1L & 500 ml|
Scrape and remove all loose/flaking rust. Wipe surface clean prior to application of the first coat of the Primer. For best results make sure the surface is cleaned to a minimum SSPC-SP2 standard of surface preparation prior to application of the Primer.
|Application Method :||Brush/Roller/Spray Use a Nylon/Polyester Brush. Use a quality ÃÂ¼ - ÃÂ¾ nap cover|
|Thinning Recommended :||0-15% by volume depending on surface, if required|
|Thinner/Cleaner :||Clean Water|
|Recoating time between coats :||4-6 hours|
SW Water Based Red Oxide/Universal Primer ( 1 Coat ) + AQUA 501 Water Based Gloss Enamel ( 2-3 coats )Shipping Information
Shelf Life Ã¢â¬â 24 Months in original sealed containers when stored in covered ventilated areasSafety & Precautions
The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of Khodal Paints. Such information and recommendations set forth herein are subject to change and pertain to the product Offered at the time of publication. Consult your Khodal representative to obtain the most recent Product Data Sheet.