Chlorinated Rubber

Chlorinated Rubber
Chlorinated Rubber
Send Inquiry
Product Code : 01
Brand Name : Chlorinated Rubber
Price And Quantity
  • Minimum Order Quantity
  • 100 Liter
  • Price
  • 210 INR
Product Description

Physical Data

Color: grey/red
Finish: matt
Solids by volume: 35 + 3%
Theoretical spreading rate: 10.00 sq. Mt./ltr. At recommended dft of 35 µ
Flash point: 25° c
Drying characteristics:
  • Surface Dry : About 15 minutes
  • Hard Dry : Overnight
  • Full Cure : 7 Days
Shell Life: 6 months

Surface Preparation

Blast cleaning to SA 2 1/2 Swedish specifications is preferred. In case it is not feasible, then manual cleaning by mechanical methods like wire brush, emery paper, hand /power tools, etc., to archive St-2/St-3 cleaning standards of Swedish specification. The surface should be free from rust, moisture, oil, dust and dirt should be absolutely dry before painting.

Application Data

Application : By brush
Thinner : 003 / 006
Recommended dft : 35 – 35 µ.
Overcoating interval : Min. : 18 - 24 hours Max.: Infinite
Compatibility : Can be applied on epoxy primer and oleo-resinous primer. Not to be top coated / over coated by two component paints like epoxy, pu, etc.

Application Method

Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume can be added. Use quality brushes for paint application. Size of the brush should be in proportion to the work hand.

Application : By Brush / By Conventional Spray / By Airless Spray

Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% thinner by volume. Apply evenly in crossed manner ensuring the uniform application. Use quality brushes for paint application.

For Conventional Spray application:
  • Thinner : Type 002
  • Addition : 10-15%
  • Nozzle Orifice : 1.2 – 1.4mm
  • Nozzle Pressure: 40 – 70 p.s.i.


  1. Do not apply paint when temperature falls below 10° C or rises above 50° C when Relative Humidity is above 85% & during rain, fog or mist. Surface temperature must always be minimum of 3° C above Dew point.
  2. Brushes and spray equipment should be cleaned with KP’s recommended thinner otherwise equipment is liable to be damaged
  3. DFT variation can be obtained by change in application method / thinning ratio. Contact Khodal Paints representatives for further assistance.
  4. Shelf life indicated is minimum for this Product in sealed conditions and it is subject to re-inspection thereafter. Individual component is required to be stored in cool, dry and covered condition away from heat and ignition.

Health & Safety

This is a solvent based paint and care should be taken to avoid inhalation of spray or eyes. Mist or vapours as well as contact between the wet paint and exposed skin.

Limitation of Liability

To the best of our knowledge the technical data in our literature are true and accurate at the date of issuance but are subject to change without prior notice. We guarantee our product to confirm to the specifications contained herein. We make no other warranty or guarantee of any kind, express or implied, including merchantability and fitness for particular purpose. Liability, if any is limited to replacement of the product or refund of the purchased price. Labour or cost of labour and other consequential damages are hereby excluded.

Trade Information
  • Payment Terms
  • Cheque, Cash in Advance (CID), Cash Advance (CA), Cash on Delivery (COD), Cash Against Delivery (CAD)
  • Supply Ability
  • 1000 Liter Per Day
  • Delivery Time
  • 1 Days
  • Sample Available
  • Yes
  • Main Domestic Market
  • All India


Back to top
KHODAL PAINTS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.